Software Setup, Errors, and General Questions

How do I digitize grading data?

Digitzing Grading Data

In order to digitize grading data, you need a 16 button cursor. The following images show the digitizer button setup window and the exact sequence of how to digitize grading data. The grading data for curve points need not be digitized in because StyleCAD's grading data blending algorithm will take care of the curve points. The black numbers represent the button to press and the red numbers represent the exact order in which they are entered.

 


Digitizing Internal Lines and Drill Holes


A. Digitizing Internal lines 

    Step 1: With the [Intermediate/selection button] (usually button A on a 16 button mouse or button 3 on a 4 button mouse), (refer to the Digitizer Cursor Configuration), click the [Internal Line] menu item. If you have the sound on, you should hear "Internal Line." 

    Step 2: Now you are in Internal Line digitizing mode. You can now digitize the internal line as you would digitize any line normally. In other words, use [Grading Button] or [Intermediate/selection button] for the curve point. When you are finished with the line, press the [End Mode Button] (usually button 1 on either 4 or 16 button mouse). This finishes the first internal line. At this point, you are still in internal line mode. You can repeat step 2 again for second internal line or proceed to step 3. 

    Step 3: Press the [End Mode Button] once more to exit the internal line mode. If you have the sound on, you should hear "Internal Line Finished." 

B. Digitizing Drill Holes 

    Step 1: With the [Intermediate/selection button] (usually button A on a 16 button mouse or button 3 on a 4 button mouse), (refer to the Digitizer Cursor Configuration), click the [Drill Hole] menu item. If you have the sound on, you should hear "Drill Hole." 

    Step 2: Now you are in drill hole digitizing mode. Use [Intermediate/selection button] for the drill hole. You can repeat step 2 again for a second drill hole or proceed to step 3. 

    Step 3: Press the [End Mode Button] to exit the drill hole mode. If you have the sound on, you should hear "Drill Hole Finished." 



StyleCAD was founded in 1996 and is based in the United States.
We are a leading designer of CAD systems, serving the apparel, furniture, industrial and automotive design industries.
Copyright © SoftFashion, Inc. All rights reserved.
Powered by webtogi.com